SOYO SY-K7VTA - Manual (Page 65)

BIOS Setup Utility SY-K7VTA
61
3-3.5 Boot Up NumLock Status
Setting Description Note
On Puts numeric keypad in
NumLock mode at boot-up. Default Boot Up
NumLock
Status
Off Puts numeric keypad in arrow key
mode at boot-up.
3-3.6 Gate A20 Options
Setting Description Note
Normal Lets chipset control GateA20. Gate A20
Options
Fast A pin in the keyboard controller
controls GateA20. Default
3-3.7 Typematic Settings
Typematic Settings Setting Description Note
Disabled Keystrokes repeat at a rate
determined by the
keyboard. Default Typematic
Rate Setting
Enabled When enables , the
typematic rate and
typematic delay can be
selected.
The following [Typematic Rate] and [Typematic Delay] fields are active
only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate 6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec) Choose the rate at which a
character is repeated when
holding down a key. Default
Typematic Delay 250 (msec)
500 (msec)
750 (msec)
1000 (msec) Choose how long after
you press a key down the
character begins
repeating. Default