SOYO SY-K7VTA - Manual (Page 79)

BIOS Setup Utility SY-K7VTA
75
Power Management Controls (Continued)
Power
Management
Controls Setting Description Note
3 Default MODEM Use
IRQ
3-11, NA
Assigns an IRQ# to the modem
device.
Instant-off Default Soft-Off by
PWR-BTTN
Delay 4
Sec. Turns off the system power 4
seconds after pushing the power
button.
On The system will switch on when
power comes back after a power
failure.
Off The system will remain off when
power comes back after a power
failure. Default
State After
Power Failure
Auto The system will return to the state
it was in before the power failure
when power returns. (i.e: If the
system was on, it will switch on
again, if it was off, it will remain
off)
Wake Up
Events Press Enter Select items that will wake up your
system when in one of sleep
modes. Press enter to go the select
item page.
Wake Up
Events Setting Description Note
OFF Default VGA
ON You can set the VGA awakens the
system.
LPT/COM Default LPT & COM
NONE
LPT
COM
When On of LPT & COM, any
activity from one of the listed
system peripheral devices or IRQs
wakes up the system.