Sharp AR-C260 - Manual (Page 122)

6-28
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that another copy job can be run.
It is not possible to interrupt an automatic two-sided copy job.
1 Touch the [INTERRUPT] key.
If the [INTERRUPT] key
does not appear,
interrupt copying is not
possible.
When the [INTERRUPT]
key is touched in step 1,
the [INTERRUPT] touch
key will be replaced by
the [CANCEL] key as
shown in the illustration.
2 Place the original for the interrupt copy job
in the document feeder (if a reversing
automatic document feeder is installed) or
on the document glass (page 4-6).
If a black and white copy
job is being interrupted
to run another black and
white copy job, the
number of originals that
can be copied in the
interrupt job is 35.
(based on text original
(A) on page 5-4)
3 Make all other desired settings such as
exposure, paper size and number of
copies and then press the [COLOR COPY
START (
)] or [BLACK COPY START
( )]key.
When making black and
white copying using the
document glass in the
sort mode, replace the
original with the next
original and press the
[BLACK COPY START]
key. Repeat this
operation until all
originals have been
scanned. Then, touch
the [READ-END] key.
4 When the interrupt copy job is finished,
touch the [CANCEL] key to turn off the
interrupt copy state.
5 Resume the interrupted copy job.
If a color copy job was interrupted, replace the
originals that have not yet been copied and
resume copying.
If a black and white copy job was interrupted,
replace the originals that have not yet been copied
and press the [BLACK COPY START] key to
resume copying.
NOTES
● If you touch the [INTERRUPT] key when the
account counter function is turned on, the display
will prompt you to enter your account number.
Enter your account number with the numeric keys.
The copies you make will be added to the count of
the entered account number.
● If the [INTERRUPT] key is touched while an
original is being scanned, the interrupt state will
begin after scanning is completed. If the
[INTERRUPT] key is touched during copying, the
interrupt state will begin after the copy is
completed.
● Interrupt copying is not possible during automatic
two-sided copying using the optional duplex
module/2 x 500 sheet paper drawer. In addition,
automatic two-sided copying is not possible during
interrupt copying.
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100 %
OPY RATIO
PLAIN
INTERRUPT
ORIGINAL
5½x8½
0
1
1
X
8½x11
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
OPY RATIO
100 %
PLAIN
CANCEL
ORIGINAL
5½x8½
0
1
1
X
8½x11
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
OPY RATIO
100 %
PLAIN
CANCEL
ORIGINAL
5½x8½
0
1
1
X
8½x11
00-08.book 28 ページ ２００２年１１月８日 金曜日 午前９時３９分