Sharp AR-C260 - Manual (Page 132)

SPECIFICATIONS
8-4
Reversing automatic document feeder (optional)
Duplex bypass/inverter unit (optional)
Original feed system Automatic continuous feeding
Original transport system RADF: sheet through type (reference position: center), document glass: reference
position is left rear
Original setting direction Face up
Original sizes 5-1/2" x 8-1/2" to 11" x 17" (A5 to A3)
Original weight One-sided original : 14 to 54 lbs. (50 to 200 g/m 2 )
Two-sided original : 14 to 42 lbs. (50 to 156 g/m 2 )
Capacity Up to 100 sheets (8-1/2" x 11", 21 lbs. (A4, 80 g/m 2 ))
Up to 60 sheets (8-1/2" x 14" or larger, 21 lbs. (B4 or larger, 80 g/m 2 ))
For originals heavier than 21 lbs. (80 g/m 2 ), the total thickness must not exceed
13/32" (10 mm). However, for originals that are larger than 8-1/2" x 14" (B4), the
total thickness must not exceed 1/4" (6 mm).
Functions Original reversing function (supports two-sided originals; original size detection)
Power supply Supplied from machine
Dimensions 32-3/8" (W) x 20" (D) x 4-13/16" (H) (822 mm (W) x 508 mm (D) x 122 mm (H))
Weight Approx. 28.7 lbs. (Approx. 13 kg)
Number of sheets 1 sheet (non-stack method)
Paper size Face-up output: Same as paper feed specifications of machine
Face-down output: 12"x18", 11"x17", 8-1/2"x14", 8-1/2"x13", 8-1/2"x11", 8-1/2"
x11"R, 7-1/4"x10-1/2"R, 8-1/2"x5-1/2", A3W, A3, B4, A4,
A4R, B5, B5R, A5
Page weight Face-up output: 17 to 80 lbs. (64 to 300 g/m 2 )
Face-down output: 17 to 54 lbs. (64 to 200 g/m 2 )
Transport reference point Center reference point
Dimensions 6-5/32" (W) x 17-29/64" (D) x 17-1/64" (H)
(156 mm (W) x 443 mm (D) x 432 mm (H))
Weight Approx. 14.4 lbs. (Approx. 6.5 kg)
Some discrepancies may exist in the illustrations and content due to improvements to the machine.
00-08.book 4 ページ ２００２年１１月８日 金曜日 午前９時３９分