Sharp AR-C260 - Manual (Page 90)

REDUCTION/ENLARGEMENT/ZOOM
5-14
6 Ensure that the desired paper size has
been automatically selected based on the
selected copy ratio or select another size
as needed.
Auto paper select display
7 Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing "0".
8 Press the [COLOR COPY START ( )]
or [BLACK COPY START ( )] key.
If you placed the original
on the document glass,
set the output to "Sort",
and pressed the [BLACK
COPY START] key, you
must touch the [READ-
END] key after all pages
of the original have been
scanned. (Step 7 on
page 5-8)
NOTE
If the auto paper select display does not appear, no
appropriate paper size for the selected ratio is
available.
Use the [C] (clear) key to cancel an entry if a mistake
has been made.
To return the ratio to 100%
To return the ratio setting to 100%, touch the [COPY
RATIO] key to display the ratio menu and then touch
the [100%] key. (Steps 2 and 3 on page 5-13.)
8½x14
AUTO
EXPOSURE
AUTO 8½x14
PAPER SELECT
77 %
COPY RATIO
PLAIN
INTERRUPT
ORIGINAL
8½x11
0
8½x11
8½x11
DUPLEX
11x17
00-08.book 14 ページ ２００２年１１月８日 金曜日 午前９時３９分