Sharp AR-C260 - Manual (Page 51)

SADDLE STITCH FINISHER
3-3
3
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher.
The cartridge package contains three cartridges of approximately 5000 staples
each.
Page weight
Upper tray: 17 to 80 lbs. or 64 to 300 g/m 2 for face up output
17 to 54 lbs. or 64 to 200 g/m 2 for face down output
Lower tray 17 to 28 lbs. or 64 to 105 g/m 2
Paper types
Upper tray: Same as paper specifications of the machine
Lower tray: Plain paper only
Paper full detection Both upper and lower tray
Offset function
Upper tray only (offset function not possible for 5-1/2" x 8-1/2"R and A5R size
paper)
Allowed paper sizes for
stapling
Upper tray: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4,
A4, A4R, B5
Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, A4R
Maximum number of
sheets for stapling
See "Staple sort mode" on the next page
Stapling positions
Upper tray: 3 locations (1 position back, 1 position front, 2 positions center)
Lower tray: 4-47/64" (120 mm) pitch from center of paper
Paper conveying Center reference
Power supply Supplied from machine (Stand / paper drawer)
Dimensions 28-43/64" (W) x 23-3/4" (D) x 39-3/8" (H) (728mm(W) x 603mm(D) x 1000mm(H))
Weight Approximately 86lbs. (39kg)
Name Punch unit
Paper sizes for hole
punching
2 holes
Allowed paper sizes for
punching 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R,
B5, B5R
NOTES
● Transparency film, envelopes, postcards, and other special papers cannot be stapled.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically canceled.
00-08.book 3 ページ ２００２年１１月８日 金曜日 午前９時３９分