Sharp AR-C260 - Manual (Page 130)

8-2
SPECIFICATIONS
Copier and Main unit
* The indicated first-copy time assumes the following conditions:
Upper tray at paper intake / horizontal feeding of A4 size paper / no pre-scan / left output tray/ transfer belt: black copy position
The first-copy time is slower when making copies on transparency film, heavy paper, or other special paper in the
bypass tray.
Type Desktop (can be upgraded to console type if an optional stand is installed.)
Print system System (LED head system)
Exposure system OPC
Developer system Contact non-magnetic single-component development
Paper feed system Paper trays
Fusing system Press rollor fusing method
Resolution Scan: 600 x 600 dpi, output: 600 x 600 dpi
Gradation Scan: 256 levels, output: 2 levels
Printing: Color: Equivalent of 256 levels / Black and white: 2 levels (in copy mode)
/ Equivalent of 256 levels (in printer mode)
Originals Sheets, bound documents
Maximum size: 11" x 17" or A3
Copy paper Plain paper and special papers
Copy sizes Max. 12" x 18" or A3wide, min. 5-1/2" x 8-1/2" or A5
Image loss: Max. 1/4" or 6 mm (leading edge and trailing edge in total),
max. 1/4" or 6 mm (along all other edges in total)
Warm-up time 99 seconds or less
First-copy time* Full color/single color copying : 8.0 seconds or less
Black/white copying : 7.0 seconds or less
Copy ratio Variable: 45 to 400% in 1% increments, total 356 steps
Fixed presets: 25%, 50%, 64%, 77%, 100%, 121%, 129%, 200% and 400% for
inch system, 25%, 50%, 64%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%
and 400% for AB system.
Continuous copy 999 copies; subtractive counter
Expansion DIMM slot 1 slot (128 MB or 256 MB can be installed)
Dimensions 26-25/64" (W) x 26-5/8" (D) x 27-59/64" (H) (670 mm (W) x 676 mm (D) x 709 mm (H))
Weight (main unit only) AR-C260 : Approx. 143.4 lbs. (Approx. 65kg)
AR-C260M : Approx. 147.8 lbs. (Approx. 67kg)
Overall dimensions 39-9/64" (W) x 26-5/8"(D) (994 mm (W) x 676 mm (D))
Required power supply USA: AC120V, 60Hz, 12A
Other countries: Local voltage
± 10% (For power supply requirements, see the
name plate located on the right hand side at the rear of the main unit.)
Power consumption Max. 1.5 kW
Operating conditions* Temperature: 59°F to 86°F (15°C to 30°C),
Humidity: 20% to 80%
* If the temperature is higher than 86°F (30°C), the humidity should be lower than
60%.
00-08.book 2 ページ ２００２年１１月８日 金曜日 午前９時３９分