Sharp AR-C260 - Manual (Page 16)

PART NAMES AND FUNCTIONS
1-6
Part names and functions of peripheral devices
Reversing automatic document feeder (AR-RF3)
This automatically feeds originals to be scanned.
The feeder can turn the original over and scan the
back side as well as the front side for support of
two-sided originals.
Large Capacity tray (AR-LC5)
The large capacity tray provides the added
convenience of having 3,000 additional sheets of 8-
1/2" x 11" or A4 paper (20 lbs. or 80 g/m
2 ) available.
Stand/1 x 500 sheet paper drawer (AR-D17)
This stand has one paper tray. It can hold
approximately 500 sheets of the recommended
paper for color (20 lbs. or 80 g/m
2 ), or
approximately 500 sheets of SHARP standard
paper (20 lbs. or 80 g/m
2 ).
Duplex module/2 x 500 sheet paper drawer (AR-D19)
This stand includes a module for automatic two-
sided printing and two paper trays. The two trays
can hold approximately 500 sheets of the
recommended paper for color (20 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (20 lbs. or 80 g/m
2 ). To perform two-sided
printing, a duplex bypass/inverter unit (AR-RB1) is
required.
Stand/3 x 500 sheet paper drawer (AR-D18)
This stand has three paper trays. Each tray can
hold approximately 500 sheets of the
recommended paper for color (20 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (20 lbs. or 80 g/m
2 ).
Saddle stitch finisher (AR-F13)
The finisher can deliver sets saddle stitched and
folded at the paper centerline to form a pamphlet*,
edge stapled in three different modes or unstapled.
For two-hole or three-hole output, a hole punch
module must be installed.
* When used for pamphlet copying, only black and
white output is possible.
Duplex bypass/inverter unit (AR-RB1)
This module is required to automatically turn paper
over within the machine for automatic two-sided
printing.
00-08.book 6 ページ ２００２年１１月８日 金曜日 午前９時３９分