Sharp AR-C260 - Manual (Page 52)

SADDLE STITCH FINISHER
3-4
Saddle stitch finisher functions
■ ■ ■ ■ Sort mode
Sorted sets will be delivered.
■ ■ ■ ■ Group mode
Groups of copies of the same page will be
delivered.
■ ■ ■ ■ Offset mode
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation.
(The offset function only operates in the offset
tray.)
Stapled sets will not be offset.
■ ■ ■ ■ Staple sort mode
Collated sets of prints or copies will be stapled and delivered to the offset tray. When saddle stitching is selected,
the prints or copies will be stapled at the center and delivered to the saddle stitch tray. The stapling positions,
orientation, paper size for stapling, and stapling capacity are shown below.
Printouts Original
Printouts Original
Offset mode Non-offset mode
Stapling positions
Top left corner of
printouts
Lower left corner
of printouts
Portrait orientation Landscape orientation
Available paper sizes:
8-1/2" x 11", A4 and B5
Stapling capacity:
For each size, up to 30 sheets
can be stapled
Same as above
Available paper sizes: 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2"
x 11" R, A3, B4 and A4R
Stapling capacity: Up to 30
sheets of 8-1/2" x 11"R or A4R
paper can be stapled, up to 25
sheets of other paper sizes
Saddle stitch on
centerfold line. Paper in the portrait
direction cannot be saddle
stitched. Available paper sizes: 11" x17",
8-1/2" x 11"R, A3, B4, and A4R
Stapling capacity: For each
size, up to 10 sheets can be
stapled
Center left two
positions of
printouts
Same as above Same as above
Same as above
00-08.book 4 ページ ２００２年１１月８日 金曜日 午前９時３９分