Sharp AR-C260 - Manual (Page 81)

NORMAL COPYING
5-5
5
Copy output (sort and group)
Example: Making five sets or five copies each of three originals
● Sorting copies into sets
● Grouping copies by page
About the offset function
This function offsets each set of copies from the
previous set in the output tray, making it easy to
separate sets of copies.
(Offset can function for output to the upper output tray
or in the offset tray of the saddle stitch finisher.)
Turning on the offset function
The offset function operates when a checkmark
appears in the [OFFSET TRAY] checkbox, which is
displayed by touching the [CENTER TRAY] key and
then selecting the upper output tray. (If a checkmark
doesn't appear, touch the checkbox.)
Offset width: Approximately 1-3/10" (30 mm)
(12" x 18" (A3W) paper cannot be offset.)
SPECIAL MODES
2-SIDED COPY
OUTPUT
OUTPUT
½Г˚МЯЩ
¿˚Д
SORT
GROUP
Original
Press the [BLACK
COPY START] key
Press the [COLOR
COPY START] key
Set the
number of
copies (5) Touch the
[OUTPUT] key Touch the
[SORT] key
Five sets of
copies
In the case of color
copying, only one set of
copies can be made even
if a selection is made for
the number of copies.
(See "Copy mode output
restrictions" on page 5-4.)
If multiple sets are
needed, place the original
on the original table again
and repeat the copying
procedure for each set
needed.
"Sort" is automatically selected when the
original is placed on the document feeder tray
of the reversing automatic document feeder.
SPECIAL MODES
2-SIDED COPY
OUTPUT
OUTPUT
SORT
GROUP
Original
Press the [BLACK
COPY START] key
Press the [COLOR
COPY START] key
Set the
number of
copies (5)
Touch the
[OUTPUT] key Touch the
[GROUP] key
5 copies per page
"Group" is automatically selected when the
original is placed on the document glass.
Offset function "ON" Offset function "OFF"
INTERRUPT
READY TO COPY. 0
OK OUTPUT
SORT
GROUP
OFFSET TRAY
CENTER TRAY LEFT TRAY
Selecting the output tray
When the [LEFT TRAY] key in the above illustration
is highlighted, copies are output to the tray on the
left side of the machine (the left tray). When the
[CENTER TRAY] key is highlighted, copies are
output to the center tray. Touch the key of the tray
you wish to use for copy output.
00-08.book 5 ページ ２００２年１１月８日 金曜日 午前９時３９分