Sharp AR-C260 - Manual (Page 86)

5-10
EXPOSURE ADJUSTMENTS
Exposure selections for this copier should be selected according to the type of originals being copied: TEXT/PRTD.
PHOTO, TEXT/PHOTO, TEXT, PHOTO, PRINTED PHOTO or MAP. If the original image type is TEXT/PRTD.
PHOTO, TEXT or TEXT/PHOTO, the exposure can be adjusted automatically or manually. If the original image type
is PHOTO, PRINTED PHOTO or MAP, the exposure can be adjusted manually only. If the COPY OF COPY mode
is selected only TEXT/PRTD. PHOTO, TEXT, or PRINTED PHOTO exposure can be selected and these can only
be manually adjusted. If the COLOR TONE ENHANCEMENT mode is selected, color copies will be more vivid.
1 Touch the [EXPOSURE] key.
2 Select [AUTO], [TEXT/PRTD. PHOTO],
[TEXT/PHOTO], [TEXT], [PHOTO],
[PRINTED PHOTO], or [MAP] depending
upon the original type.
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100 %
N
INTERRUPT
½
0
8½x11
PA
CO
A
OK
TEXT/
PRTD.PHOTO
PRINTED
PHOTO
TEXT/
PHOTO
TEXT PHOTO
MAP
AUTO
NOTES
●
● ● ● Selecting the resolution
Six resolution settings are available for both color
copying and black and white copying, depending
on the contents of the original.
● ● ● ● Making a copy of a copy
When making copy of a copy made on this
machine, touch the checkbox for COPY OF COPY
to select the mode. Three resolution settings are
available when this mode is selected: "TEXT/
PRINTED PHOTO", "TEXT", and "PRINTED
PHOTO".
● For brighter colors in color copies, touch the
COLOR TONE ENHANCEMENT checkbox. Color
tone enhancement cannot be selected at the
same time as COPY OF COPY mode, and it
cannot be selected at the same time as single
color copying (page 6-17).
Original type Contents of the original
AUTO
Black and white copying :
This is the standard initial setting for
this copier. In this mode, the
characteristics of an original being
copied are "read" by the exposure
system, and exposure adjustments are
made automatically. This optimizes
the contrast of the copied images.
Full color copying:
The image is processed to obtain the
most suitable color image. This
setting should normally be selected.
TEXT/
PRTD.
PHOTO This mode provides the best balance
for copying an original which contains
both text and printed photographs.
TEXT/
PHOTO
This mode provides the best balance
for copying an original which
contains both text and photographs.
TEXT
This mode is useful in enhancing
very low density areas of an original
or in suppressing unusually high-
density background areas.
PHOTO
This mode provides the best copies
of photographs with fine details.
PRINTED
PHOTO This mode is useful for copying
printed photographs.
MAP
This mode is useful to provide the
best shading and fine details found
on most maps.
00-08.book 10 ページ ２００２年１１月８日 金曜日 午前９時３９分