Sony CDX-C580 - Manual (Page 17)

17
EN
DISC CD2
CD/MD Changer
Locating a disc by name
— List-up (CD changer with custom file
function or MD changer)
You can use this function with discs that have
been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD.”
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• Once a disc name has been displayed for five
seconds, the display goes back to its normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file,
“********” appears in the display.
• If the disc information has not been read by the
unit, “NOT READ” appears in the display. To load
the disc, first press the number button, then
choose the disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD playback).
ENTER
L1
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc Name
$
Clock
$
MOTION DISPLAY*
* All the items above are scrolled in the display
one by one in order.
Erasing the disc memo
1
Select the CD changer (page 14).
2
Press (LIST) for two seconds.
3
Press (DSPL) for two seconds.
4
Rotate the dial to select the name that
you want to erase.
5
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.