Sony CDX-C580 - Manual (Page 19)

19
EN
3
Press (4) (n).
The unit stores TV channels in the order of
their frequencies on the number buttons.
A beep sound and the setting is stored.
4
Press (SHIFT).
Notes
• The unit does not store TV channels with weak
signals. If only a few TV channels are received,
some number buttons will remain empty.
• When a preset number is indicated in the display,
the unit starts storing TV channels from the one
currently displayed.
Memorizing only the
desired TV channels
You can store up to 10 channels on the number
buttons in the order of your choice.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Push the SEEK/AMS control up or down
to tune in the TV program you want to
store on the number button.
3
Keep the desired number button ((1) to
(10)) pressed for two seconds until you
hear a beep tone.
The number button indication appears in
the display.
Note
If you try to store another program on the same
number button, the previously stored program will
be erased.
With Optional Equipment
TV/Video
You can connect an optional TV tuner and TV
monitor with this unit (For CDX-C580 only).
Watching the TV
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Push the SEEK/AMS control up or down
to select the desired TV band.
Watching a video
1
Press (SOURCE) repeatedly until
“TV” appears.
2
Press (MODE) repeatedly to select
“VIDEO 1.”
Play back the video.
Note
“VIDEO 2” appears if the VIDEO 2 terminal of the
TV monitor is selected.
Memorizing TV channels
automatically
The unit selects the TV channels with the
strongest signals and memorizes them in the
order of their frequency.
Caution
When tuning in a station while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “AUTO MEM”
appears.
CD/MD Changer /TV/Video