Sony HIPATH 500 - Manual (Page 19)

Basic functions
19
Step by step
Basic functions
Answering a call
Special default ring signaling is set for your telephone:
•
When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance telepho-
ne, your telephone rings three times in rapid suc-
cession every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
The number or the name of the caller appears on the
display.
Answering a call via the handset
The phone is ringing. The caller appears on the screen.
^
Lift the handset.
+
or
-
Raise or lower the volume. Keep pressing the key until
the desired volume is set.
Please read the introductory chapter "Getting to
know your OpenStage phone"
Æ page 10 care-
fully before performing any of the steps descri-
bed here on your phone.
Your service personnel can adjust the ring ca-
dence for external and internal calls for you.
In other words, different ring cadences can be
set for different internal callers.