Sony HIPATH 500 - Manual (Page 84)

Step by step
More functions/services
84
Controlling relays
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after
timeout).
Select and confirm the option shown.
or
select and confirm the option shown
1
...
4
Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.
Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network)
Æ page 95!
*90=Control relay on?
#90=Control relay off?