Sony CDP-D11 - Manual (Page 7)

7
З¢ЗОЗ¢ЗОЗ»зƒк∂ ÇÃǵǩÇΩ VARIOUS OPERATION
On display window
Total playing time of the disc, remaining playing time,
etc. can be checked in the display window.
VARIOUS OPERATION
Basic display
To check the remaining time of
current playing track or of whole disc
Press DISPLAY during playback or in pause mode.
Each time it is pressed, display changes as below.
Current track number and elapsed
playing time (normal display)
Remaining time of the current track
DISPLAY
Searching for a track
(AMS/Direct play/Music scan)
There are 5 ways for search as follows. AMS is a
shortened form of Automatic Music Sensor.
Number buttons
≠ AMS ±
MUSIC SCAN
>20
·
=/+
Operation
Turn the AMS control to right
during playback. (Press
+ in the
remote control.)
Turn the AMS control to left during
playback. (Press
= in the remote
control.)
Press the number button of desired
track number.
1 Turn the AMS control in stop
mode to select a track number.
2 Press the AMS control or the fl
button.
1 Press the MUSIC.SCAN button.
2 Press the
· button when
desired track is played.
How to search
To skip to the
beginning of the next
track (AMS)
To skip to the
beginning of the current
or the previous track
To select the track
number directly
(Direct play)
Z
To search by track
number (AMS)
To search by listening to
the beginning of each
track (Music scan)
Z
0 )
0 )
+ =
p P ·
DISPLAY
Press
Press
Press
fl
0 )
0 )
+ =
p P ·
Remaining time of the whole disc
C t 1
T 16 14 54
Index 1
s m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
C t 1
T 16 14
54
54
3 s
s m
m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
C t 1
T 16 14
20
54
-1 s
s m
m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
C
T 16 14
28
54
-49 s
s m
m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
Playback
pause mark Current track
number Elapsed playing time
of the current track
Playback mark Total
number
of tracks Total playing time of
whole disc
C t 12
T 16 14
40
54
3 s
s m
m
REPEAT
PLAY MODE
A-PAUSE
A-CUE
MARK
VARI SPEED
Index number in the current track
z To select the 21st track or after by the direct play Z
Press the >20 button, then press the second digit number
and the first digit number by the number buttons.
Example: To select the 30th track
Press the number buttons in the order of >20 n3 n10.
z
Playing time of each track during Music scan can
be changed.
1 Press the MENU/EXIT button in stop mode to
display “MENU Mode”.
2 Turn the AMS control to display “MUSIC SCAN”,
then press the AMS control.
3 Turn the AMS control to set the playing time
between 6 seconds to 20 seconds (1 second interval),
then press the AMS control.
4 Press the MENU/EXIT button.
z
Play can be paused at the beginning of a track.
Turn the AMS control in pause mode.
(Press
= or + in the remote control.)