Sharp AR-M355N - Manual (Page 276)

INSTALLING PRINTER DRIVERS USING THE "ADD PRINTER WIZARD"
17
■ ■ ■ ■ Example of installation of a printer driver using the "Add Printer Wizard" in Windows XP
The method for installing a printer driver using the "Add Printer Wizard" in Windows XP is shown below.
The installation example assumes that the printer is connected as a local printer (see "CONNECTING THE
MACHINE TO YOUR COMPUTER" on page 18) and that the CD-ROM drive is drive "R". The procedure may
differ depending on the system environment.
1 Start Windows XP.
2 Insert the supplied CD-ROM into the CD-
ROM drive.
3 Click the [start] button, click [Control
Panel], click [Printers and Other
Hardware], and then click [Printers and
Faxes].
4 Click [Add a printer] in [Printer Tasks].
5 Follow the on-screen instructions.
To specify the printer driver path, enter the
following path:
R:\Drivers\Printer\English A*\PCL5e\2kxp or
R:\Drivers\Printer\English A*\PCL6\2kxp
* "English A" in North America. "English" in
Europe.
■ ■ ■ ■ Installing PCL Display Fonts
The PCL display fonts are fonts displayed on your computer screen. The "SOFTWARE CD-ROM (1)" contains
the PCL display fonts that correspond to the resident fonts in the machine. These display fonts can be installed
to your computer (Windows 95/98/Me/NT 4.0/2000/XP/Server 2003) from the installer. When installing the PCL
display fonts using the Windows installation procedure instead of the installer ([Start] - [Settings] - [Control
Panel] - [Fonts] - [Install] - [New Font]), specify the following path.
R:\Drivers\Printer\Font\PCLFont (Where "R" represents the letter of your CD-ROM driver.)
inst_us.book 17 ページ ２００４年９月２日 木曜日 午前１０時１９分