Sharp AR-M355N - Manual (Page 98)

REDUCTION/ENLARGEMENT/ZOOM
4-19
4
7 Use the reduction, enlargement, and
ZOOM ([
], [ ]) keys to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
become highlighted
when touched.
The zoom keys can be
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
8 Touch the [OK] key.
9 If needed, touch the [PAPER SELECT] key
and select the paper size.
If the AUTO PAPER
SELECT mode is on, the
appropriate copy paper
size will have been
automatically selected
based on the original
size and selected copy
ratios.
10 Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
ZOOM
50%
50
70 Y
X
64%
77%
XY ZOOM CANCEL
ZOOM
50
77 Y
A
OK
PA 400%
200%
100%
129%
0
AUTO
ORIGINAL
AUTO
EXPOSURE
PAPER SELECT
X-50% Y-70%
COPY RATIO
PLAIN
PLAIN
PLAIN
PLAIN
To cancel an X or Y zoom setting...
Touch the [XY ZOOM] key or the [CANCEL] key in
the ratio selection screen (step 3 or 7 on page 4-18).