Sharp AR-M355N - Manual (Page 68)

SADDLE STITCH FINISHER
3-15
3
Specifications are subject to change for improvement without notice.
Supplies
AR-SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.
Saddle stitch finisher functions
■ ■ ■ ■ Sort mode
Sorted sets will be delivered.
■ ■ ■ ■ Offset mode
■ ■ ■ ■ Group mode
Groups of copies of the same page will be
delivered.
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.
Stapling capacity
8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m 2 )
8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m 2 )
*Up to two sheets of 34 lbs. or 128 g/m 2 paper can be included as covers.
Staples
Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centered on the left side.
Lower tray: 4-47/64" (120 mm) pitch from the center of paper
Power supply Supplied from machine
Dimensions
28-9/32"* (W) x 23-3/4" (D) x 39-3/8" (H) (718 mm* (W) x 603 mm (D) x 1000 mm (H))
*When the top tray is extended.
Weight Approx. 86 lbs. (39 kg)
Name Punch module
Paper sizes for hole
punching 3 holes: 11" x 17", 8-1/2" x 11", A3, A4
2 holes: 8-1/2" x 14", 8-1/2" x 11"R
Printouts Original
Offset mode Non-offset mode
Printouts Original