A look at the operation panel, 1a look at the operation panel – Sharp AR-M355N User Manual

Page 290

Advertising
background image

1-3

1

A LOOK AT THE OPERATION PANEL

The operation panel used for the fax function is described below.

Touch panel (following page)

• Messages and keys appear in the touch panel.

Touch the displayed keys to select functions and
enter settings.

• When a key in the touch panel is touched, a beep

sounds and the key is highlighted.

• Keys that cannot be selected in a screen are

grayed out. If touched, a double-beep will sound
to alert you that the key cannot be selected.

Mode select keys (page 2-2)

Use these keys to change modes.

[IMAGE SEND] key

Press to switch to fax mode. The main screen of fax
mode will appear.
The screen that appears when this key is selected
can be changed with "Default display settings" in
the key operator programs (page 8-4).

Numeric keys

Use to enter fax numbers, sub-addresses,
passcodes, and numerical settings. (See
"MEMORY BOXES AND SUB-ADDRESSES/
PASSCODES REQUIRED FOR F-CODE
TRANSMISSION
" on page 4-2.)

[C] key (clear key)

Use to clear a mistake when entering fax numbers,
sub-addresses, passcodes, and numerical
settings. One digit is cleared each time you press
the key.
When an original is being scanned, this key can
also be used to cancel scanning.

[CA] key (clear all key)

Use to cancel a transmission or programming
operation. When this key is pressed, the operation
is canceled and you return to the main screen
described on the following page.
This key is also used to cancel resolution, paper
size and special mode settings.

[

] key (page 5-3)

This is used to produce tone signals when you are
on a pulse dial line.

[START] key (page 2-3)

Press to begin scanning an original for fax
transmission.

Model

Key name

Description in this manual

AR-M355N/
AR-M455N

Described in the configuration where the
optional fax expansion kit (AR-FX12) is
installed on the AR-M355N/AR-M455N models.

AR-M355U/
AR-M455U

No functions related to document filing or
Internet fax reception are described in this
manual.

NOTE
For the names and functions of the parts of the machine, see page 1-9 of the "Operation manual (for general
information and copier operation)".

Tiger2_fax_sec.book 3 ページ 2004年9月16日 木曜日 午前8時53分

Advertising