Sony HIPATH 8000 - Manual (Page 85)

Making and receiving calls using multi-line phones
85
Step by Step
Call pickup
You can pick up calls for another DSS station. If a call is
waiting on their line, the LED flashes.
Indirect pickup
Prerequisite: The auto-answer function must be deac-
tivated Æ page 69.
T
Press the direct station selection key. The call is routed
to your primary line and rings.
^
or
n
or
o
Lift the handset or press the speakerphone mode or
headset key. You are connected with the other party.
Rejecting a call
Prerequisite: Service personnel must activate the re-
ject option for DSS keys and auto-answer must be de-
activated Æ page 69.
T
Press the direct station selection key. The call is routed
to your primary line and rings.
Select and confirm the option shown in the pop-up
menu.
The caller hears a busy signal.
Direct pickup
Prerequisite: The auto-answer function must be acti-
vated Æ page 69.
T
Press the direct station selection key. The call is routed
to your primary line and you are immediately connected
with the other party via speakerphone.
Deflecting a call to a DSS station
Prerequisite: The deflect function must be approved
for DSS keys (see Æ page 59).
If you receive a call on one of your lines, you can imme-
diately deflect it to the DSS station.
T
Your phone rings and a line key flashes.
S
Press the relevant DSS key. The call is deflected to the
DSS station. If the DSS station does not answer, you
can pick up the call by pressing the DSS key.
Reject