Sony DVO-1000MD - Manual (Page 15)

O
v
er
v
iew
Turning the Power On/Off
15
Turning the Power On/
Off
Turning the Power On
1
Connect the AC power cord (not supplied) to the
wall outlet, and then set the MAIN POWER switch
located on the rear panel to the [ (on) side.
The standby indicator on the front panel lights in
green.
2
Push the 1 (power) switch on the front panel.
The power of the unit is turned on and the front
panel display lights. The message “Welcome”
appears on the front panel display. Then, the
message changes to “Now loading...” When the
message changes finally to “NO DISC!,” you can
start the next operation.
When a disc is loaded in the unit, “0101 0:00:00” is
displayed instead of “NO DISC!.”
To turn the power on or off during normal
operations
Turn the power on or off using the 1 (power) switch on
the front panel.
When you push the 1 (power) switch again, “Good
Bye” appears on the front panel display and then the
front panel display goes off and the power is turned off.
Then, the unit turns to the standby mode.
Turning the Power Off
If you do not intend to use the unit for a long period, turn
the main power of the unit off.
1
Push the 1 (power) switch on the front panel to put
the unit in the standby mode.
2
Set the MAIN POWER switch on the rear panel to
the z (off) side.
The standby indicator on the front panel goes off
and the power is turned off.
1
Standby indicator
2
AC power cord (to AC outlet)
Rear panel
Front panel