Sony DVO-1000MD - Manual (Page 18)

O
v
er
v
iew
Setup Preparation
18
The message “NOW SAVING....” appears and the
unit starts to save the setting.
When saving is completed, the message disappears.
Then, “TV SYSTEM WAS CHANGED PLEASE
POWER OFF.” appears on the monitor display, and
“POWER OFF!” appears on the front panel display.
Note
The TV system is not changed even if you push the
SET button. Be sure to turn the power of the unit off
and on as described in steps 11 and 12 to change the
system.
11
Press the 1 (power) switch on the front panel to
turn the power off.
The message “Good Bye” appears on the front
panel display. Then, the front panel display goes
off, the power is turned off and the unit enters the
standby mode.
12
Press the 1 (power) switch again to turn the power
on.
Setting the Date and Time
The DATE/TIME PRESET sub menu of the SETUP
MENU allows you to set the date and time.
1
Press the MENU button.
The TOP menu appears.
2
Select “SETUP MENU” by pressing the V or v
button.
“SETUP MENU” is highlighted.
3
Press the b button.
The SETUP MENU appears.
4
Select “DATE/TIME PRESET” from the SETUP
MENU display.
Each time you press the v or V button, the
highlighted cursor moves down or up one by one.
When the highlighted cursor reaches the last item
pressing the
v button, press the v button again. The
next page of the SETUP MENU appears.
9 1
6 2,7 4 3,5