Sony DVO-1000MD - Manual (Page 34)

Pl
a
y
bac
k
Playback
34
Playback
Playback
Usable Discs
You can use the 4 x DVD+RW discs.
Note
The recorded discs may not be able to be played back
due to scratch on the disc, dust accumulated on the disc,
conditions recorded or recording equipment.
Playback a Disc
1
Press the 1 (power) switch to turn the power on.
The message “Welcome” appears on the front
panel.
When the message changes to “Now loading...”,
and then to “NO DISC!.”, go to the next operation.
Note
If the power is not turned on and the front panel
display does not light even if you press the 1
(power) switch, check whether the MAIN POWER
switch on the rear panel is set to the ] (on) side.
For detailed information on how to turn the power
on or off, see “Turning the Power On/Off” on page
15.
2
Press the OPEN/CLOSE button.
The disc tray opens.
The message changes to “OPEN” on the front panel
display.
3
Place the disc to be played on the tray.
4
Press the OPEN/CLOSE button.
The disc tray closes.
The DISC IN display blinks and the message “Now
loading...” appears on the front panel display.
Go to step 5, after the message Now loading...”
disappears and the DISC IN display lights up.
5
Press the BPLAY button.
Playback starts.
Note
For a moment, the picture is frozen and audio
playback stops between titles.
To stop playback
Press the xSTOP button.
Fast Forward or Reverse Playback
To view fast forward playback
Press the >NEXT/DOWN button with the BPLAY
button held down. This allows you to view fast forward
playback at a speed three times the speed of normal
playback.
To view reverse playback
Press the .PREV/UP button with the BPLAY button
held down. This allows you to view fast reverse
playback at a speed three times the speed of normal
playback.
Adding Indexes During Playback
You can add indexes using the SVRM-100A remote
control unit.
For detailed information on how to add indexes, see
“Using an SVRM-100A Remote Control Unit (Not
Supplied)” on page 57.
1 3 2,4
5
x STOP button