Sony DVO-1000MD - Manual (Page 56)

Mis
c
e
lla
neou
s
Specifications
56
Specifications
General
Recording /playback format
DVD +VR format
Video: MPEG-2 @ML(CBR, VBR)
Audio: Dolby digital 2 CH
Signal format system
NTSC/PAL (switchable using the
menu)
Power requirements
100 to 240 V AC, 50/60 Hz
Input current 0.56 A to 0.28 A
Operating temperature
5°C to 40°C (41°F to 104°F)
Operating humidity
20% to 80% (no condensation allowed)
Storage and transport temperature
–20°C to +60°C (–4°F to 140°F)
Storage and transport humidity
75% or less (no condensation allowed)
Mass Approx. 6 kg (13 lb 4 oz)
Dimensions Approx. 212 Ч 128.5 Ч 382 mm (w/h/d)
(8 3/8 Ч 5 1/8 Ч 15 1/8 inches)
(including the maximum projecting
parts)
Input/Output Connectors
Analog video inputs
VIDEO IN (BNC type × 2, loop-
through with 75
Ω automatic
terminator), Composite, 1.0 Vp-p,
75
Ω, sync negative
S-VIDEO IN (4-pin mini DIN × 2,
loop-through with 75
Ω automatic
terminator)
Y: 1.0 Vp-p
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL), color burst, 75
Ω, sync
negative
Analog video outputs
VIDEO OUT (BNC type × 1)
Composite, 1.0 Vp-p, 75
Ω, sync
negative
S-VIDEO OUT (4-pin mini DIN × 1)
Y: 1.0 Vp-p
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL), color burst, 75
Ω, sync
negative
Analog audio inputs
AUDIO IN L/R (Phono jack × 1 for
each channel), 2 Vrms (Full bit),
input impedance 47 k
Ω or more,
unbalanced
Analog audio outputs
AUDIO OUT L/R (Phono jack × 1 for
each channel), 2 Vrms (Full bit),
load impedance 47 k
Ω, unbalanced
MONITOR AUDIO (Phono jack × 1) 2
Vrms (Full bit), load impedance
47 k
Ω, unbalanced
Digital signal
DV IN (i.LINK)
6-pin, complying with IEEE1394
Control Signals
REMOTE 1 Stereo mini jack, for connection of an
SVRM-100A remote control unit
(not supplied)
REMOTE 2 Mini jack, for connection of a foot
switch (not supplied)
REMOTE IN RS-232C
D-sub 9-pin, asynchronous serial
USB (Universal Serial Bus)
Specification Revision 2.0 (up to Full
Speed)
212 (8 3/8)
382 (15
1/
8)
12
8.
5 (5
1/
8)
Unit: mm (inch)