Sony DVO-1000MD - Manual (Page 19)

O
v
er
v
iew
Setup Preparation
19
Press the v button several times until “DATE/TIME
PRESET” is highlighted.
5
Press the b button.
The DATE/TIME PRESET sub menu appears.
6
Select the digit to be set by pressing the B or b
button.
Press the B or b button until the digit you want to
change is highlighted.
To move the cursor between the date
column and the time column
If you press the
b button when the rightmost digit
of the date column is highlighted, the leftmost digit
of the time column is highlighted. When the
leftmost digit of the time column is highlighted, if
you press the B button, the rightmost digit of the
date column is highlighted.
Front panel display during menu operation
The date column appears when you set the date in
the date column on the DATE/TIME PRESET sub
menu. And the time column appears when you set
the time in the time column.
7
Change the numeric value by pressing the V or v
button.
Press the V button to increase a value.
Press the v button to decrease a value.
8
Set the remaining date and time values by repeating
steps 6 and 7.
9
Press the SET button when you have completed
setting the date and time.
The date and time values set are executed.
The message “NOW SAVING...” appears and the
unit starts to save the setting.
When the saving is completed, the message
disappears and the unit returns to the normal
display.
To cancel the date/time setting without
changing any values
Press the MENU button. The unit returns to the (2/
2) or (2/3) SETUP MENU display one level higher
than the current one. The setting is cancelled. Press
the MENU button again. The unit exits the menu
display and returns to the normal display.
Note
In this case, the message “ABORT!’ will not
appear.
Time display
Highlighted display (digit to be
changed)
Date display (month/date/year)