Siemens ProLINE-RoadRunner - Manual (Page 16)

1 4
ProLINE-RoadRunner Operator’s Guide A
2
To mount RoadRunner on an
assembly machine:
1. With the feeder table pulled out,
slide the supplied hook around
a pin on the assembly machine
feeder table.
2. Secure the hook to the table by
tightening the thumbscrew.
NOTE: A black hook must be used
on taller RoadRunners; a silver
hook on older models. The label
on the conveyor indicates which
hook to use.
Mounting on the Assembly Machine
1
Heavy; 16 kg (35 lbs). Do Not Drop.
Mount Only With Approved Hardware.
Warning: