Siemens ProLINE-RoadRunner - Manual (Page 46)

4 4
ProLINE-RoadRunner Operator’s Guide A
To restart RoadRunner after a pause
or an emergency stop:
1. Turn the
Emergency Stop
button clockwise to release it, if
needed.
2. Press
Menu until the main level
menu is displayed
3. Select
Align Pocket.
4. Press the
Up Arrow to advance
the device tape until the next
pocket center hole lines up with
the alignment mark.
5. Press
Start.
The job will resume. „
1
Job
Advance Pocket
> Align Pocket
Purge
3
Restarting a Job
4
5