Siemens ProLINE-RoadRunner - Manual (Page 36)

3 4
ProLINE-RoadRunner Operator’s Guide
To align the tape pockets:
1. Select
Align Pocket from the
Operator Menu.
2. Press the
Up Arrow button to
advance the tape until the next
tape pocket center hole is
approximately centered at the
pick point alignment mark. Do
not advance devices past the pick
point. They may fall and jam the
tape path. Do not use the
Down
Arrow to align.
NOTE: This aligning procedure
must be performed each time
power is applied, such as after
releasing the
Emergency
Stop. „
Aligning the Tape Pockets
1
Job
Advance Pocket
> Align Pocket
Purge 2