Siemens ProLINE-RoadRunner - Manual (Page 38)

3 6
ProLINE-RoadRunner Operator’s Guide A
To run a job:
1. Insert a job card in the PCMCIA
card slot.
2. Clear the conveyor belt of any
unneeded devices.
3. Press
Start.
The green lamp will start
blinking.
When the programmed devices
reach the assembly machine
pick point, the belt will pause
and the green lamp will stay lit
without blinking.
„
Running a Job
3
> Job
Advance Pocket
Align Pocket
Purge
1