Remo t e on, Operating the remote control – Sharp VL-WD250U User Manual
Page 51
38
Useful Features
90
180
Remote sensor
16 ft
(5 m)
Approximate operating
range of remote control
REC START/STOP button [
p. 18
]
ZOOM W/T buttons
[
pp. 19, 51
]
REW button [
p. 21
]
PLAY button
[
p. 21
]
FF button
[
p. 21
]
PAUSE/STILL button [
pp. 23, 40
]
STOP button
[
p. 21
]
SLOW button
[
p. 40
]
Advance/reverse buttons [
p. 40
]
Shift buttons [
p. 51
]
VOL. +/L buttons
[
p. 21
]
3
Press
d
or
y
to select “ON”, then
press
e
.
4
Press the MENU/DISPLAY button to
turn off the menu screen.
REMO T E
ON
Operating the Remote Control
1
Open the LCD monitor completely (
1
),
then rotate it 180° vertically (
2
).
2
Set the Power switch on the camcorder
to CAMERA or VCR.
3
Aim the remote control at the remote
sensor of the camcorder, and press the
control buttons for operation.
Notes:
• Be careful not to allow direct sunlight or bright
light from interior illumination to fall onto the
remote sensor, as this may prevent the remote
control from operating properly.
• Be sure that there are no obstacles between the
remote control and the remote sensor.
• When the batteries are depleted and the remote
control does not operate, replace them with new
AA (R6 or UM/SUM-3) batteries.