Sharp VL-WD250U - Manual (Page 6)

v
Quick Operation Guide
Please consult this operation manual
further for details on these and other
functions of your camcorder.
SA VE
RE C
SA VE
RE C
Charging the Battery Pack
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
2
Align the s mark on the battery pack
with the a mark on the charger ( 1 ) and
guide the battery into the groove.
Pressing the battery (
2 ), slide it in the
direction of the arrow ( 3 ) until it locks
into place.
Inserting a Mini DV Cassette
1
Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
2
Insert the cassette fully with the window
facing outwards, and with the erasure
protect tab facing upwards.
3
Press the W mark gently until the
cassette holder clicks into place. Close
the compartment door by pressing the
center until it clicks into place.
Attaching the Battery Pack
1
Make sure that the Power switch is set
to OFF.
2
Lift up the viewfinder.
3
Align the - mark on the side of the
battery pack with the q mark on the
camcorder ( 1 ), and slide the battery
pack down completely until it locks into
place (
2 ).
W mark