Sharp VL-WD250U - Manual (Page 56)

43
Advanced Features
Camera Recording
Advanced Features
Subject is too dark.
Manual Focus
Auto Focus may not be able to focus on the
subject in the situations shown below. In such
situations, set the camcorder to Manual Focus
mode and focus manually.
1
Set the camcorder to CAMERA mode.
2
Press the AUTO ON/OFF button to
select Manual mode.
3
Press the MENU/DISPLAY button until
the menu screen appears.
4
Select T , then press r on the
Operation button. Select “MAN. FOCUS”
(
1 ), then press r ( 2 ).
5
Press e to display the focus setting
screen.
MAN. FOCUS AU TO
MANUAL
E XPOSURE
SHU T. SP E ED
P I C. E F F E C T
SC E NE MENU
F ADE
QK. RE TURN
MANUAL S E T
6
Adjust the Power Zoom
control to frame the
subject as you desire.
Lack of contrast, e.g. snow
scene.
Fast-moving subject. Background is too bright.
Subject has horizontal stripes.
Subject is being shot through a
dirty or wet window.
Light reflects off the subject.
Two subjects at different distances
overlap in the same scene.
Subject has fine, repeated
patterns.
Subjects at different distances
appear in the center of the scene
at the same time.
MANUAL
F OCUS
F AR
NE AR
1 2 bit
SP
S E T [ BUT TON]
Fast-speed shutter being used
under fluorescent lighting.