Easy camera recording 1, Tape playback 1, Zooming – Sharp VL-WD250U User Manual
Page 7
vi
Easy Camera Recording
1
Make sure that a cassette is inserted.
2
Remove the lens cap, and lift up the
viewfinder.
3
Hold down the Lock button
and set the Power switch to
CAMERA.
4
Press the REC START/STOP button to
begin recording.
Lock button
RE C
Power Zoom
control
Tape Playback
1
Press the LCD monitor OPEN release
button (
1
), and open the LCD monitor
to a 90° angle to the camcorder body
(
2
).
2
Adjust the LCD monitor to an angle that
allows easy viewing on the on-screen
picture.
90
3
Hold down the Lock button
and set the Power switch to
VCR.
4
Press
e
(or
r
) on the Operation
button to rewind (or fast forward) the
tape to the desired point.
5
Press
y
to begin playback.
AUDIO1 2
+
AUDIO1 2
+
To stop playback
Press
d
.
Zooming
Push the Power Zoom control to T (
1
)
(telephoto) or W (
2
) (wide angle) side.
LCD monitor OPEN
release button
Lock button