Sd-3 write-protect switch – Sun Microsystems TIMBERWOLF 9740 User Manual
Page 84
Advertising
Setting the Write-Protect Switch
A-14
Revision P
95693
SD-3 Write-Protect Switch
To write-enable an SD-3 cartridge:
1. Hold the cartridge with the write-protect switch towards you.
2. Locate the write-protect switch on the front of the cartridge.
3. Slide the write-protect switch to the right so that the pencil icon is joined.
To write-protect this cartridge, slide the switch to the left so that the pencil icon is
split.
Figure A-16. Setting the Helical Scan Write-Protect Switch (C62034)
C62034
LABELS
LEADER
BLOCK
DETENT
SPRINGS
WRITE-ENABLE POSITION
WRITE-PROTECT POSITION
Advertising