Sharp MX-3100N - Manual (Page 45)

1-4
BEFORE USING THE MACHINE
Contents
(8) Keyboard
This is a keyboard that is incorporated into the machine.
When not used, it can be stored under the operation
panel.
☞
ENTERING TEXT FROM A KEYBOARD (page 1-73)
(9) Saddle stitch finisher *
This can be used to staple output. The saddle stitch
function for folding and stapling output and the fold function
for folding output in half are also available. A punch module
can also be installed to punch holes in output.
☞
SADDLE STITCH FINISHER (page 4-45)
(10) Tray 1
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30)
(11) Tray 2
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30)
(12) Tray 3 (when a stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is installed)*
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30)
(13) Tray 4 (when a stand/2 x 500 sheet paper drawer is
installed)*
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30)
(14) Tray 5 (when a large capacity tray is installed)*
This holds paper.
☞
TRAY SETTINGS OF TRAY 5 (LARGE CAPACITY
TRAY)
(page 1-32)
(15) USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB
memory to the machine.
For the USB cable, use a shielded cable.
* Peripheral device.
(9) (8) (11) (10) (14) (12) (13) (15)