Sharp MX-3100N - Manual (Page 64)

1-23
BEFORE USING THE MACHINE
Contents
REMOTE OPERATION OF THE MACHINE
The remote operation function allows you to operate the machine from your computer.
When this function is added, the same screen as the operation panel screen appears on your computer.* This allows
you to operate the machine from your computer in the same way as if you were standing in front of the machine.
* Before using this function, set "Remote Operation Settings" in the system settings (administrator) to allow operation.
To use the remote operation function, the machine must be connected to a network and a VNC application must be
installed on your computer (recommended VNC software: RealVNC Version 4.3).
How to use the remote operation function
The procedure for using this function is as follows:
Example: RealVNC
(1) Start the VNC viewer
(2) Enter the IP address of the machine in the "Server" entry box.
(3) Click the [OK] button.
When the machine is connected to the remote software, appears on the system bar of the machine's touch panel. If
you wish to disconnect, exit the remote software or touch .
Use the operation panel in the same way as you would on the machine. For detailed procedures, see the chapters for each
of the functions in this manual.
System Settings (Administrator): Remote Operation Settings
Set the operation authority for the remote operation function.
Operate the
machine using
your computer
screen.
Your computer
Network
Operation panel
The machine