Samsung SF4500 - Manual (Page 21)

1.14 Set Up Your Machine
3. Press Enter . The display asks you to choose the resolution or contrast.
4. Press 1 to choose ÔRESOLUTIONÕ. 2 for ÔCONTRASTÕ. You can also
choose the mode by pressing
or ¹ and
Enter . The display shows the
current mode.
5. Press
à or ¨ repeatedly until you find the desired mode.
HOME RESOLUTION
¥STANDARD Ð use with most documents.
¥FINE Ð default resolution settings and should be used for documents
with fine detail, or small print.
¥SUPER FINE Ð originals with extremely fine detail.
HOME CONTRAST
¥NORMAL Ð use with documents of average or normal contrast.
¥DARKEN Ð use with documents with low contrast or light images.
¥LIGHTEN Ð use with documents with high contrast or dark images.
¥PHOTO Ð for obtaining maximum image quality with documents that
contain pictures or photographs with shades of grey.
6. Press Enter. The display asks you to choose RESOLUTION or
CONTRAST.
7. If necessary, repeats steps 4 and 5. To return to Standby Mode
press Stop .
Adjusting Speaker Volume
1. Press OHD to adjust the speaker volume. If you cannot hear dial tone,
check the phone line connection.
2. Press
or ¹ repeatedly until you find the desired loudness. The
display shows the current volume level.
3. After choosing the desired volume level, press OHD .
1.RESOLUTION
2.CONTRAST