Samsung SF4500 - Manual (Page 42)

2.19 Receiving a Fax
Receiving a Fax
Your multi-function machine has four reception modes:
¥ In Fax mode, the machine answers an incoming call and immediately
goes into receive mode, waiting for a fax to be sent.
¥ In Tel/Fax mode, the machine answers an incoming call expecting to
receive a fax. If the machine does not sense a fax signal, it will continue to
sound the ringing tone to tell you it is a phone call. If you do not lift the
handset during the ringing, the machine will switch to automatic fax
reception mode.
¥ In Ans/Fax mode, the answering machine answers an incoming call, and
the caller can leave a message on the answering machine. If the fax
machine senses a fax tone on the line, the call automatically switches over
to the fax machine. To use Ans/Fax mode, you should attach an
answering machine (TAD) to the EXT socket on your fax machine (see
page 1.6).
¥ In Tel mode, automatic fax reception is turned off. You can receive a fax
only by manually picking up the handset and pressing Start .
The lamps located above the Rcv. Mode button indicate the selected
reception mode.
If you seldom use the fax line for voice conversations, set the fax machine
to receive a fax automatically by selecting either Fax or Tel/Fax mode.
Receiving a Fax
2
Operation