Samsung SF4500 - Manual (Page 36)

2.13 Sending a Fax
Voice Request
If youÕre sending or receiving a document and need to speak to the other
person during the same phone call, use Voice Request to alert the person at
the remote site. You can also respond to a Voice Request made by the
person at the remote end.
Sending a Voice Request
1. Press V.Req. while a document is being sent or received. Voice Request
signal is stored and then sent to the remote fax machine after the
document has been sent or received.
2. When the phone rings, pick up the handset and answer it.
You can cancel a Voice Request by pressing V.Req. again while you are
sending or receiving a document.
Answering a Voice Request
When the phone rings after sending or receiving a fax, pick up the
handset and answer it.
If you donÕt answer the Voice Request, the machine prints out the number
that made the Voice Request, and the time and date the request was made.
Delayed Transmission
You can set your machine to send a fax at a later time when you will not be
present. A maximum of 10 transmission jobs can be reserved in your
machine.
1. Load the document face down. If necessary, use Resolution , Contrast ,
or EXPRESS button. For details, see page 2.8.
2. Press Menu , then press Delay TX on the One-Touch keypad.
3. Enter the number of the remote machine, then press Enter .
To enter the number, you can also press a One-Touch button, including a
Group dial button. Otherwise, press
Speed , enter a 2-digit Speed Dial
number, then press Enter . The stored number (and name) appears in the
display. Press Enter to confirm the number.
2
Operation