Samsung SF4500 - Manual (Page 44)

2.21
¥If you have set your machine to Ans/Fax and your answering machine is
switched off, or no answering machine is connected to your fax machine, your
machine will automatically go into fax receive mode after 10 rings.
¥If your answering machine has a Ôuser-selectable ring counterÕ, set the
machine to answer incoming calls within 4 rings or less.
¥If you are in Tel mode (manual reception) when the answering machine is
connected to your machine, you must switch off the answering machine, or
the outgoing message from the answering machine will interrupt your phone
conversation.
Receiving a Fax
Receiving Manually in Tel Mode
1. Press Rcv.Mode until both Fax and Tel/Fax lamps are off.
2. When the telephone rings, pick up the handset and answer it.
3. If you hear a fax tone, or if the person on the other end asks you to
receive a document, press Start .
4. Replace the handset. The machine begins receiving and returns to
Standby Mode when reception is complete.
Receiving Automatically in Ans/Fax Mode
To use this mode, you must attach an answering machine (TAD) to the EXT
jack on your fax machine (see page 1.6).
1. Press Rcv.Mode until both Fax and Tel/Fax lamps light.
2. When you get a call, the answering machine answers it. If the caller
leaves a message, the answering machine stores the message normally.
If your machine hears a fax tone on the line, fax receive mode is
activated.
2
Operation