Sharp ER-A242 - Manual (Page 16)

14
Single item entries
Department entries
The cash register provides a maximum of 99 departments for a merchandise classification. Group attributes,
such as taxable status, are applied on items when they are entered to the departments.
• When using the department keys (for department 1 to 32)
For department 1 to 16, enter a unit price and press a department key. If you use a programmed unit price,
press a department key only.
For department 17 to 32, enter a unit price, press the
D key and press a department key. If you use a
programmed unit price, press the D key and press a department key.
* 1 Less than the programmed upper limit amounts
When zero is entered, only the sales quantity is
added.
* 2 For the optional departments 17 through 32,
press the
D key.
• When using the department code entry key
Enter a department(dept.) code and press the d key, then enter a unit price and press the d key again. If
the dept. code is programmed to preset price entry style and a unit price is preset, your cash register will finish
its registration operation.
* 1 Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
PLU/subdepartment entries
For another merchandise classification, the cash register provides a maximum of 1200 PLUs/subdepartments.
PLUs are used to call up preset prices by a code entry. Subdepartments are used to classify merchandise into
smaller groups under the departments. Every PLU and subdepartment has a code form 1 to 1200, and should
belong to a department to obtain attributes of that department.
The cash register is pre-programmed to PLU mode and zero for unit price. To use PLU entries, their preset unit
prices should be previously programmed. (Refer to page 33.)
To use subdepartment entries, change to subdepartment mode for the PLU codes.
• PLU entries
• Subdepartment (open PLU) entries
* Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
PLU code
(1 to 1200)
p
Unit price *
(max. 7 digits)
p
PLU code
(1 to 1200)
p
Dept. code
(1 to 99)
Unit price * 1
(max. 7 digits)
When using a programmed unit price
(In case only preset price entry is allowed.)
d d
Department key Unit price * 1
(max. 7 digits)
When using a programmed unit price
D
* 2
Item Entries 3
A242_2 FOR THE OPERATOR 06.1.10 5:16 PM Page 14