Training mode – Sharp ER-A242 User Manual
2 Programming report 2
A to H from the left
Training clerk specification
EJ memory type
* Job code #63, 64, 65, 67,
69, 71, 72, 76, 77, 85, 87
and 95 are fixed settings,
for which you cannot
change the settings.
4 Printer density programming report
5 PLU programming report
3 Auto key programming report
The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to “Training clerk specification for training mode” in “ADVANCED PROGRAMMING” in page 53.
The training operation is valid only in REG, MGR and VOID mode.
The corresponding clerk memory is only updated in the training mode.
A clerk set in training
Key operation example
A242_4 FOR THE MANAGER 06.1.10 5:25 PM Page 56