A@ r – Sharp ER-A242 User Manual
Page 40
38
Entry digit limit for
r
,
R
and
t
• For
r R
, enter 0 to 9 (digits), and for
t
(manual tax), enter 0 to 7 (digits). By default, 9 for
r
and
R
and 7 for
t
are set.
Entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit
limit is represented by the number of allowable digits for maximum entry or total amount. When “0” is set, the
operation of the corresponding key is prohibited.
Function parameters for
C
,
c
and
A
(when using as CA key)
*1:Item:
Selection:
Entry:
A
Footer printing
Allow
1
Disallow*
0
B
Amount tendered entry
Compulsory
1
Non-compulsory (for the CA or CHK keys)*
0
Inhibit (for the CH key)*
0
C
Entry digit limit
0-8 (default: 8)
Footer printing
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section on page 43.
Amount tendered entry
• You may select amount tendered, compulsory or optional, for the
A
and
C
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
key.
Entry digit limit
• For the
c
and
C
keys, program upper limit entry amount for the tendered amount. For the
A
key,
program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is
in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented
by the number of allowable digits for the maximum entry or total amount. When “0” is set, the operation of the
corresponding key is prohibited.
ABC (A:0, B:1, C:8)
018
@
C A
Key operation example
*
1
ABC or
A
To program “0” for all items
To program for another key
*
2
:Press
s
key for CA key setting.
@
s
,
C c
*
2
4
@
R A
Key operation example
Entry digit limit
(only for manual entry)
A
@
r
,
R
or
t
A242_3 FOR THE MANAGER 06.1.10 5:19 PM Page 38