Sharp ER-A242 - Manual (Page 35)

33
Example: Programming department 2 as taxable 1, SICS, negative department, entry digit limit - 7 digits, and
allowing open & preset entry. (ABCDEFGH: 00011173)
Preset unit price
To program another department, start from the beginning without pressing the A key.
Even if a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. A
maximum of 1200 PLU/subdepartment settings are possible. Each one belongs to a department and acquires
the department’s parameters (tax status, SICS and sign).
The cash register is preprogrammed so all 1200 codes are assigned as PLUs associated with department 1 and
preset unit price “0”.
PLU (Price Look-Up) and Subdepartment Programming 2
Unit price
1000 !
A
Print Key operation example
For department 33-99:
d s
Dept. code
Unit price
(max. six digits)
A
To program zero
To program zero
Dept. key
Unit price
(max. six digits)
D
*
*To program departments 17 through 32, press the department shift key at this point.
A
Tax status
From left, EGH
Sign(F)
00011173 @
" A
Print Key operation example
A242_3 FOR THE MANAGER 06.1.10 5:19 PM Page 33