Speco Technologies 10X PAN-TILT HTSD10X - Manual (Page 13)

13
correct password. In order to enter [PASSWORD] page, system lock status is must set as ON.
Move joystick to right or left direction to select ON. The default setting is OFF.
B-8-2.
DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page to set a password, move the joystick to the right direction. The password must be
set by preset number from 001 to 255 (Default 99)
A. OSD MAIN MENU TABLE (PAGE 11) The default setting is BLANK.
Press any number from 001~255 with the preset button on password blank and again to confirm.
Then “CONFIRMED” is displayed on the monitor and the menu will go back to the previous page
automatically.
<CONFIRMED> <CANCELLED>
If the user presses the wrong preset number between PASSWORD and CONFIRM, “CANCELLED”
is displayed on the monitor and if user fails 3 times, the menu will return to the previous page
automatically * After setting a Password, an operator must press memorize password in order to
enter OSD MAIN MENU, or to change the data which is memorized originally.
* An operator must remember the password for the operation. Manufacturer doesn ’t provide a
memorized password.
B-8-3.
DOME SET – [NEXT PAGE] – [OSD DISPLAY]
OSD ID is displayed if set ON here. Move the joystick to the right or left direction in order to select
OSD MENU SETTING
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CONFIRMED