Speco Technologies 10X PAN-TILT HTSD10X - Manual (Page 20)

20
E-8. AUTO SCAN – EXIT
To escape this page, move the joystick to the right .
F. TOUR SET
8 Programmable tours can be set and each tour is available to set up to 64 preset steps. After setting
the data to each tour group, 71~78 + preset buttons are working as group tour # 1~8
F-1. TOUR SET – TOUR NO.
Max. 8 group tour no. set by the joystick are available.
F-2. TOUR SET – TOUR TITLE
To set the tour title, select up to 16 characters using Joystick to left or right.
Press ZOOM TELE button to move the next character from the left to the right and ZOOM WIDE
button to move the next character from the right to left direction (Space displays when
˜ appears)
The tour title is not displayed on the monitor, but only for the reference of user.
F-3. TOUR SET – TOUR STEP
Each tour group consists of up to 60 preset steps with different dwell time and speed. It is possible
to match any preset # for each tour step.
F-4. TOUR SET – PRESET NO.
The chosen tour step #101 ~200. It is possible to select any preset no. up to 164.
F-5. TOUR SET – DWELL TIME
Dwell time can be up to 99 seconds from 01 second. The default setting is 03 seconds.
F-6. TOUR SET – SPEED
Each tour step can be set with different tour speed up to 200°/S and it is selectable from 10°/S.
Move joystick to the right or left to select the tour speed. The default setting is 200°/S.
F-7. TOUR SET – SAVE
To save the memorized data and escape this page, move the joystick to the right when the
cursor is at SAVE
OSD MENU SETTING
TOUR SET
TOUR NO
: 01
TOUR TITLE : TOUR01□□□□□□□□□□
TOUR STEP : 01
PRESET NO. : 01
DWELL TIME : 03
SPEED : 200°/S
SAVE
EXIT
DEFAULT SETTING