Speco Technologies 10X PAN-TILT HTSD10X - Manual (Page 24)

24
J. SECTOR SET
Up to 8 programmable sectors are available with 16 characters.
This feature is useful to memorize certain locations such as a parking zone, etc.
When a camera goes through this area, it shows the letter you memorized.
J-1. SECTOR SET – SECTOR NO.
Up to 8 programmable sectors set by the joystick are available.
J-2. SECTOR SET – SECTOR ID
To set SECTOR ID, select up to 16 characters by using the Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right direction and
ZOOM WIDE button to move to the next character from the right to left direction (Space displays
when
˜ appears)
J-3. SECTOR SET – SECTOR START
To set SECTOR START angle, press FOCUS FAR button then move joystick to the left or right
direction to set the position. To press FOCUS FAR button again is to escape.
J-4. SECTOR SET – SECTOR END
To set SECTOR END angle, press FOCUS FAR button then move joystick to the left or right
direction to set the position. To press FOCUS FAR button again is to escape.
J-5. SECTOR SET – SAVE
After setting the SECTOR position, to save the data, move the joystick to the right when the cursor
is on SAVE. After saving the data, the cursor moves to SECTOR NO.2 automatically to prepare the
next SECTOR.
J-6. SECTOR SET –EXIT
To escape this page, move the joystick to the right
OSD MENU SETTING
SECTOR SET
SECTOR NO : 01
SECTOR ID: SECTOR01□□□□□□□□
SECTOR START: XXX.X.XX.X
SECTOR END : XXX.X.XX.X
SAVE
EXIT
DEFAULT SETTING
Start Position
End Position