Speco Technologies 10X PAN-TILT HTSD10X - Manual (Page 3)

3
WARNING & CAUTION
If you fail to read this information and
handle the product incorrectly, serious
injury may occur.
1. Camera
2. Screws ( Ø4x16 screw 5EA )
3. Terminal block (5pin 2EA)
4. Manual
5. Screw Cap (2 EA)
Never install the product in area exposed to
oil or gas.
Never install the product on a ceiling that
cannot hold its weight.
Never touch the power cord with wet hands.
Clean only with a dry cloth.
Never install the product in extreme high or
low temperature.
Never drop hit strongly or vibrate the product.
Never touch the front glass of the product.
What’s in the Box ?
This symbol is intended to alert the user to
the presence of un-insulated
“dangerous
voltage ” within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Never move Pan/Tilt by hand. It may
causes serious damage to the camera.
Warning