Sony HDW-M2000 - Manual (Page 108)

Chapter 9
Setup Menus
9-12
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
Menu items in the range 100 to 199, relating to the control panels (Continued)
118 Select which switches and buttons can be operated when the KEY INHIBIT
switch on the switch panel is set to ON. The following sub-items control different
sets of switches and buttons independently.
REMOTE
SELECT
Sub-item
Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel
are enabled.
DIS : Disabled
ENA: Enabled
2 AUDIO/F-KEY
1
Select whether the audio signal selection buttons and F1 to F6 buttons in the
lower control panel are enabled.
DIS : Disabled
ENA: Enabled
AUDIO: The audio signal selection buttons do not function.
F-KEY: The F1 to F6 buttons do not function.
IN/MX: Among the audio signal selection buttons, only the INPUT button and MIX
button do not function.
Item number Item name Settings
KEY INHIBIT SWITCH
EFFECTIVE AREA
3 CONTROL
PANEL Select which switch and button operations can be carried out from the lower
control panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
DMC: All switches and buttons for editing operations other than the audio signal
selection buttons and F1 to F6 buttons are disabled.
ENA: All switches and buttons other than the audio signal selection buttons and
F1 to F6 buttons are enabled.
119 VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL Select the playback speed range when carrying out playback in variable speed
mode from the control panel of this unit.
OFF : –1 to +2 times normal speed
ON: 0 to 1 times normal speed
120 CTL LOCK IN VAR/SHTL Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable speed or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times
normal.
125 AUTO REWIND Select whether to rewind the tape automatically when recording or playback
reaches the end of a tape.
DIS: Do not rewind the tape automatically.
ENA : Rewind the tape automatically.
130 TIMER DISPLAY
DIMMER CONTROL Set the brightness of the time data/menu display panel.
0 to 7 : Set in this range. 0 is the brightest, and 7 the dimmest.
121 DT MODE Select field or frame mode for variable speed playback.
FIELD : Always field playback
FRAME: Frame playback in the noiseless playback speed range; otherwise field
playback.
Frame playback provides higher-density still pictures than field playback.
Note
When using the digital Betacam format, this frame mode is valid for playback in
the positive direction only.
133 TELE-FILE CONTROL
MODE Select the device used for data modification operations in the Tele-File menu.
CONTROL PANEL : Operate with the control panel of this unit.
REMOTE: Operate with remote devices connected to connectors such as
REMOTE1, REMOTE2, and RS-232C.
134 TELE-FILE MENU AUTO
POPUP Select whether to open the Tele-File menu automatically when a cassette with a
Tele-File label is loaded. However, this is valid only when the function menu is
HOME, HOME2, or page 1 to 5.
OFF : Do not open the Tele-File menu automatically.
ON: Open the Tele-File menu automatically.
(Continued)